|
輻射消毒低密度聚乙烯,輻射消毒LDPE Bormed™ LE6607-PH是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,REACH報告,SVHC報告,UL黃卡,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123 13549213581 肖生 QQ：15397858 微信：13549213581
輻射消毒LDPE, 輻射消毒, 環氧乙烷消毒, 用蒸汽消毒
Bormed™ LE6607-PH
低密度聚乙烯
Borealis AG
Technical Data
產品說明
Bormed LE6607-PH is a resin intended for evaluation for use in Healthcare applications.
Bormed LE6607-PH is an additive free low density polyethylene typically used in blow moulding articles. Material is characterised with a balanced in flexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6607PH can be steam sterilised at maximum 110 °C. Products made from Bormed LE6607-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy.
Applications
Bormed LE6607-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6607-PH .
• Bottles for irrigation solutions
• Ampoules for injectable solutions
• Bottles for IV-solutions
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
• No additives
總覽
材料狀態 • 已商用：當前有效
資料 1 • Technical Datasheet (English)
搜索 UL 黃卡 • Borealis AG
供貨地區 • 北美洲 • 拉丁美洲 • 亞太地區
• 非洲和中東 • 歐洲
特性 • 輻射消毒 • 可回收材料 • 用蒸汽消毒
• 環氧乙烷消毒 • 無添加劑
用途 • 吹塑成型應用 • 瓶子
加工方法 • 吹塑成型
物理性能 額定值單位制 測試方法
密度 0.927g/cm³ ISO 1183
熔流率（熔體流動速率） (190°C/2.16 kg) 0.30g/10 min ISO 1133
機械性能 額定值單位制 測試方法
拉伸模量 300MPa ISO 527-1/1
拉伸應力 (屈服) 12.0MPa ISO 527-2/50
拉伸應變 (斷裂) 350% ISO 527-2/50
彎曲模量 290MPa ISO 178
硬度 額定值單位制 測試方法
肖氏硬度 (邵氏 D) 52 ISO 868
熱性能 額定值單位制 測試方法
熱變形溫度 (0.45 MPa, 未退火) 51.0°C ISO 75-2/B
擠出 額定值單位制
熔體溫度 165 到 200°C
輻射消毒低密度聚乙烯,輻射消毒LDPE Bormed™ LE6607-PH是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,REACH報告,SVHC報告,UL黃卡,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123 13549213581 肖生 QQ：15397858 微信：13549213581
|
